Replacement Parts
for Draftmaster & Topper Racks
Draftmaster and Topper Racks are built strong to last long, but Mother Nature is relentless. Sometimes bits go missing. And then there is the occasional oops!
On this page you will find many common replacement parts to keep your rack in tip top condition. For parts not listed just give us a call at (800) 286-2021 and we will get you taken care of.
Click here for our replacement parts price list.
See our Accessories page for items to enhance the capabilities of your Draftmaster or Topper Rack.
[ Draftmaster ]
Cross Arm Assembly
Draftmaster racks are modular so you can have multiple CAAs to accommodate varying needs.
Normally ordered as a set of both upper and lower cross arm sub-assemblies, but you can order them individually if necessary.
Configurations vary, CAA-2100-3030 upper shown.
Item code: CAA-xxxx-yyzz
[ Draftmaster ]
Grips
Connects the oval cross arm (load bar) to the rest of the Draftmaster system.
Set of two with hardware.
Item code: Grip2
[ Draftmaster ]
End Caps
for Cross Arms
Set of four.
Item code: DMCaps
[ Draftmaster ]
Stability Straps
Just what the name implies. These straps provide extra anti-sway stability for larger Cross Arm Assemblies.
Set of two.
Item code: DMStabStrap
[ Draftmaster ]
Fork Mount Assembly
The Draftmaster system uses FMAs to mount a single bikes with classic 9x100 “quick release” fork spacing.
Also used to attach our Specialty Rails to the cross arms.
Item code: FMA
image coming soon
[ Draftmaster ]
THRU AXLE
Fork Mount Assembly
The Draftmaster system uses FMAs to mount a single bikes with classic 9x100 “quick release” fork spacing.
Also used to attach our Specialty Rails to the cross arms.
Item code: FM-TA-Base + Head-TA(size)
[ Draftmaster ]
Safety Strap
for Sxx Specialty Rails
Additional security for your long two wheeler or delta trike.
Item code: DMSS-1
[ Draftmaster ]
Safety Strap
for STT Specialty Rails
Retention strap for tadpole trikes.
Item code: DMSS-2
[ Draftmaster ]
Spacer Clip
for Front Wheel Carrier
One clip is needed for each wheel carried on the FWC.
Item code: FWCSpacer
[ Draftmaster ]
Wheel Tray Assembly
Complete tray assembly for standard single bike positions on Cross Arm Assembly.
Includes tray, wheel strap, mounting clamp, and hardware.
Item code: WTA
[ Draftmaster ]
Wheel Tray
Wheel tray component of the WTA.
200mm long.
Item code: DMTray200
[ Draftmaster ]
Wheel Strap
Wheel strap component of Wheel Tray Assembly. Also used with Sxx and STTxx Specialty Rails.
Item code: DMWS
image coming soon
[ Draftmaster ]
Extra Long
Wheel Tray Assembly
For when you need just a little bit longer tray than our standard 200mm WTA
Item code: WTA300 (aftermarket)
Item code: WTA300-OE (Orig. Equip. with a rack)
image coming soon
[ Draftmaster ]
Extra Long
Wheel Tray
Wheel tray component of the WTA300.
300mm long.
Item code: DMTray300
image coming soon
[ Draftmaster ]
Fat Tire
Wheel Tray Assembly
For tires wider than 2.5 inches.
Item code: WTA-fat (aftermarket)
Item code: WTA-fat-OE (Orig. Equip. with a rack)
image coming soon
[ Draftmaster ]
Fat Tire
Wheel Strap
Wheel strap component of the WTA-fat.
Extra long version of the DMWS to reach around fat tires.
Item code: DMWS-fat
[ Draftmaster ]
Wheel Tray Mounting Clamp
Mounting clamp to attach a wheel tray to the cross arm.
Set of two with hardware.
Item code: WTMC2
[ Draftmaster ]
Receiver Bolt Set
Bolts for connecting your Draftmaster to your car’s receiver.
Set of two bolts and lock washers.
Item code: BoltSet200 (2 inch receivers)
Item code: BoltSet125 (1.25 inch receivers)
[ Draftmaster ]
Receiver Connection Arm
Need to change your Draftmaster’s receiver connection size or length?
Our RCAs are available in these sizes and lengths.
Item code: RCA200 (2 inch receivers, std length)
Item code: RCA200XL (2 inch receivers, +7.5 inches)
Item code: RCA125 (1.25 inch receivers)
[ Draftmaster ]
Release pedal
Release pedal for Interconnect latching mechanism. Includes mounting hardware.
Item code: Pedal
image coming soon
[ Draftmaster ]
Safety Pin
Safety pin and lanyard for Interconnect release pedal.
Item code: DMSftPin
[ Topper]
Mounting Clamps
Mounting clamps for attaching Toppers to Yakima or Thule load bars. Includes hardware. Imported.
Item code: Combo
[ Draftmaster + Topper ]
Quick Release Skewer
Standard 9mm quick release skewer. Fits any fork mount with a removable 9mm skewer.
Item code: QRS
[ Draftmaster + Topper ]
Topper Lok™ Security Skewer
High grade 9mm locking skewer for all fork mount racks. Long-throw cam for set-it-once convenience. Uses common padlock or ML605 shown below.
Item code: TL (aftermarket)
Item code: TL-OE (Orig. Equip. with a rack)
[ Topper ]
Handlebar Strap
A key element to Atoc's invention of the pivoting Tandem Topper system.
Stabilizes your bicycle's handlebars during loading/unloading.
Item code: HBS
[ Topper ]
WheelCrow™
wheel strap assembly
Velcro™ wheel strap for all Topper wheel trays.
Item code: WC
image coming soon
[ Draftmaster + Topper ]
Padlock for Topper Lok™ skewers.
Works great with our Topper Lok™!
Designed for outdoor use.
No exposed shackle when in use.
Item code: ML605
[ Topper ]
WheelCrow™
(strap only)
Same as item WC but without the strap retainer. If you are replacing a worn out Velcro™ strap and still have the retainer that holds the strap into the slot on the bottom of the Topper, this is all you need.
Item code: WCstrap